Published at Saturday, 25 August 2018. Impact Driver. By Kimberley Cole.
Yes, you can put up wall board with an impact driver. In fact, the low weight and small size make it easy to wield and less tiring, too. Be careful not to become too carried away! Some impact drivers are too hard to regulate with a light press. If you think you would possibly have that issue simply grab a drywall screw adapter and go to town.
Anyway, the point is that by using a nut-driver attachment, or with a socket adapter and socket set, you'll be able to quickly finish any nut-wrenching jobs with minimal effort.
BPM stands for "blows per minute". This is the number of screws that will be driven into a surface in 60 seconds. This is also another factor that should not be taken lightly. The higher the number of blows the better; this will determine the time that you will take to cover a particular area either drilling holes or screwing. The recommended capacity of blows is 2500 and above.
Any content, trademark’s, or other material that might be found on the 15gb.us website that is not 15gb.us’s property remains the copyright of its respective owner/s. In no way does 15gb.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 15gb.us. All Rights Reserved.