Published at Friday, 24 August 2018. Impact Driver. By Verna Ramos.
The next thing you need to consider is the speed of the driver. The best combination is high torque and high maximum speed. Speed is measured in RPM or revolutions-per-minute. This is the amount of times your bit will spin around per minute. Look for an impact with a higher max RPM. This will help you drive those long screws through the hardest of materials at a faster rate. Any impact driver with 2200 or more RPM is considered fast.
The first time I picked up an impact driver, a 12-volt Makita, I thought it looked, to me, like a toy. I then tried it out by driving a 3-inch deck screw into a 4" x 4" piece of fir. I was amazed as I watched (and felt) the tiny machine effortlessly drive the screw home, sinking the head below the surface of the wood. I had to remember to keep a lot of hand pressure against the tool so that the screw driver bit did not pop out of the screw head and strip it. From that moment forward, I have never been without one of these amazing machines at my side.
ou're probably used to working with cordless screwdrivers around the house for your favorite DIY projects. That's great, but what if you run into a project that requires a bit more power than the tools you're using can provide? Or, what if you want a tool that can handle any DIY project? Well, in comes the impact driver.
Any content, trademark’s, or other material that might be found on the 15gb.us website that is not 15gb.us’s property remains the copyright of its respective owner/s. In no way does 15gb.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 15gb.us. All Rights Reserved.